4 band car gps tracker GT06 Google link GPS data high speed plat (82620419) Products
We are sorry but the product is out of stock, please check back after few days.
Name 4 band car gps tracker GT06 Google link GPS data high speed plat
Code 82620419
Type Standard
Brand Other
Category Other
Price Rs.5,600.00
Product Details

GT06 is a Mini intelligent GPS Vehicle positioning terminal. It combines the GSM wireless communication technology and GPS positioning system technology,terminals using industrial-grade highly integrated design,intelligent power-saving and passive drift suppression,installation is simple,connect the power supply to start work immediately,wide inpute voltage range,wide applicable to all types of cars,motor cycles,electric cars,ships,etc., can provide all-weather,real-time vehicle positioning function,with global positioning service platform,you can achieve remote vehicle management.

Device feature

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

Overview of the characteristics:

1.GPS position.

2.GSM 850/900/1800/1900MHZ.

3.With Shock sensor.

4.300Mah Battery inside, Power-Cut alarm.

5.Auto set APN.

6.Voltage 9-50V.

7.SOS alarm.

8.Voice Surveillance.

9.ACC detect.

1. Specification

1).GSM:850/900/1800/1900MHZ

2).GPRS: Class12, TCP/IP

3).Working Voltage:9-50V DC

4).Working current:22mA (12VDC)

5).Working current:12mA (24VDC)

6).GPS locating time:

Cold start:38s(Open sky)

Warm start:32s

Hot start:2s(Open sky)

7).GPS Precision:10m(2D RM)

8).Working temperature:-20 Celsius~+70 Celsius

9).Working humidity:20%~80%RH

10).Measurement:98(L)×52(W)×16.5(H)mm

2.Accessories

Power wire

POWER LINKE.jpg

SOS wire

sos

Microphone

microphone

Relay

relay

3.Platform:

The platform free use for 1 year.

image

4.Wire defined

1

5.Device wiring

line connect

6. SMS Commands instruction

1)Administrator Number
Text command Parameter Sample
CENTER Add 710#number#

711#number#

710#13500135000#

711#13800138000#

CENTER Del D01#

D02#

D01#

D02#

Command Description 1)Center number can control the oil and power and resume factory settings

2) Center number can receive the call and text of vibration alarm and over speeding alarm.

3) SIM must display the income call number to control oil and power.

4) Only one number can be center number.

5) Change center number must resend the command.

6)Add new center number by CETNER,A, and delete by CENTER,D

Command Feedback Successful Setting:Add admin account 1 OK!
2) View Administrator Number
Text command Parameter Sample
View 901# 901#
Command Description This directive is used to view Device Manager number.
Command Feedback Successful Setting:Admin1:

Admin2:

3)Authorized Number Set
Text command Parameter Sample
Authorized Add 101# number #

102# number #

103# number #

1:101#13800138000#

2:102#12345678912#

3:103#12345678912#

Authorized Del D11#

D12#

D13#

D11#

D12#

D13#

Command Description 1) Authorization number for SMS control oil.

2) only three numbers to set the authorization number

3) change the authorization number needs to delete the previous number

Command Feedback Successful Setting:Add Authorization account 1 OK!
4) View Authorized Number
Text command Parameter Sample
View authorized C10# C10#
Command Description This directive is used to view the equipment authorization number
Command Feedback Successful Setting:

Authorization 1:

Authorization 2:

Authorization 3:

5)APN Setting
Text command Parameter Sample
APN Setting APN#username#password] 1:APN#intenet#123#123#

2: APN#internet#

Command Description APN differs according to the local telecom operators.

For example:APN request password,please refer to Sample 1,and Sample 2 for no password.

Command Feedback Successful Setting:SET APN OK!
6) Set / View Server
Text command Parameter Sample
SERVER Parameter 803#SERVER # port# 803#222.217.240.243#8011#
View SERVER CIP# 1)CIP#
Command Description Change the IP and port when move to a new server

port:10~65535

1 is domain and 0 is IP;

Command Feedback Successful Setting:set IP OK!
7)Moving Time Interval
Text command Parameter Sample
TIMEER Parameter setting 730#uploading interval# 730#20#
Command Description Time scope:0,10~60 seconds; 0,no data uploading;

10~60,means time interval;the default value is 15 seconds!

Command Feedback Successful Setting:SET TIMER OK!
8)Static Time Interval
Text command Parameter Sample
STATIC SUP# time interval# SUP#5#
Command Description Timescope:1~60 seconds;The device has

3D transmission and the default time interval are 5 minutes.

Command Feedback Successful Setting:SET STATIC TIME OK!
9) Cancel the continuous upload
Text command Parameter Sample
NUP NUP# NUP#
Command

Description

This command is used to cancel sending data to the platform

If need again to restore the upload , you need to send TIMEER Parameter setting.

Command Feedback SET OK!
10)Power-Cut
Text command Parameter Sample
RELAYParameter1 222# 222# cut off oil and power
RELAYParameter2 333# 333# recover oil and power
Command Description 1)RELAY control the start and closeness of the relay

2) Only the center number can operate.

3)the device only cut off the oil circuit on the condition of the driving speed below 20KM/H or in static state.

4)When send the command, the device will reply “please waiting “When the vehicle speed is over 20KM/H, the device will cut off the oil or the power when the speed below 20KM/H.

Command Feedback Successful Setting:Fuel cut has already been completed OK!
11)GMT
Text command Parameter Sample
GMT 801#location, time# 801#E8#
Command Description The default time zone is Beijing time. If time zone need revised, please operate according to the above command.
Command Feedback Successful Setting:Set time zone ok!
12)Vibration Sensitivity
Text command Parameter Sample
VIBRATION Parameter 123#2#,alarming way# 1) 123#2#3#
Set into vibration alarm time V123#2# 1) V123#2#

2) V123#1#

Cancel vibration alarm 456# 456#
Command Description the sensitivity value of the vibration is from 1 to 5,1is the most sensitive and o is close. Alarming ways: 1, calling 2, texting, 3 calling and texting.

Must set the center number and receiving number.

Command Feedback set vibration alarm level,OK!
13)Speeding
Text command Parameter Sample
SPEEDING Parameter SSA#120# alarming way# 1)SPEEDING,120,3#

2)SPEEDING,120#

Command Description The speed scope is form 60-220, if the speed is no this cope, the alarm is off.

Alarming :1, calling 2, texting, 3 calling and texting.

Must set the center number and receiving number.

Command Feedback Successful Setting:set speeding alarm,OK!
14)Reset
Text command Parameter Sample
RESET 930# 930#
Command Description Reset the device
Command Feedback Successful Setting:Reset system, ok!
15)Factory
Text command Parameter Sample
Parameter 940# 940#
Command Description Restore the factory setting

Only center number can initial this function

Factory setting will recover to the original setting

Command Feedback Successful Setting:FACTORY OK!
16)Language Setting
Text command Parameter Sample
LANG Parameter LANG1#

LANG0#

LANG1# 1:CHINESE,

LANG0#:ENGLISH

Command Description ;When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting.
Command Feedback Successful Setting:SET LANG OK!
17)Position
Text command Parameter Sample
WHERE 988# 988#
Command Description Check the longitude and altitude and other information of the device
Command Feedback Reply with longitude and altitude, speed and IMEL.
18)Google Link
Text command Parameter Sample
WHERE 666# 666#
Command Description Check the location link of Google map
Command Feedback

maps.google.com/maps?q=N22.540885,E113.95265

19)Version
Text command Parameter Sample
VERSION V00# V00#
Command Description The command is to check the software version
Command Feedback VERSION:Xxxx

BUILD:2012-07-05 10:12

20)Param Check
Text command Parameter Sample
PARAM 886# 886#
Command Description The command is to check the settings and the default parameter.
Command Feedback IMEI:351190012535936

APN : cmnet

IP:IP and port

TIMER: moving uploading interval

STATIC: static uploading interval

CENTER: center number

LANG: language(CN/EN)

GMT: time zone (E/W8)

21)Status Check
Text command Parameter Sample
STATUS 902# 902#
Command Description The command is designed for checking the device’s working status.
Command Feedback External power:ON/OFF

GSM Signal:HIGH/MIDDLE/LOW

GPS:FIXED/UNFIXED

RELAYER:DISABLE/ENABLE

Vibrate Warning:ON/OFF

Pause:ON/OFF

22) Monitor (Voice Surveillance)
Text command Parameter Sample
SSS# SSS# SSS#
Command Description Using Command Send this command to the tracker’s number, the tracker will call back to admin number.
Command Feedback

Sharing is caring, show love and share the product with your friends.