• 3 Wheel Smart Car Chassis kit

    1Pcs acrylic baseboard
    2 Pcs 65mm wheel
    1 Pcs universal wheel
    2 Pcs gear motor
    4 Pcs “T”mode fixed motor bracket
    4 Pcs M3X30mm screw
    4 Pcs M3X10mm screw
    8 Pcs M3 nut
    4 Pcs M3X12+6mm copper cylinder

    රු990.00රු1,200.00 18% off
  • 3.7-5V Multifunction Bluetooth Receiver Audio Amplifier

    3.7-5V Multifunction Bluetooth Receiver Audio Amplifier Board MP3 Decoder
    Description:
    1. Bluetooth specification: Bluetooth 2.1
    2. Transmission power; Class 2
    3. Transmission distance: about 10M
    4. Supply voltage: DC/3.7V to 5V
    5. Output power: 3W
    6. SNR:>80db
    7. Frequency response: 10-20000 (Hz)
    Package Include:
    1 Pcs Audio Amplifier Board
  • Bluetooth Speaker 820 Bluetooth, TF card, U disk, AUX

    • Function Bluetooth, handsfree, TF card, U disk, AUX,,TWS, RGB linght and IPX5
    • Material ABS+Rubber+Fashion fabric+Silica gel
    • Charging USB Micro
    • Color Black, White, OEM Color
    • Unit size 77.4*77.4*160.5mm
    • Net weight 600g
    • Bluetooth 5.0
    • Channel 2
    • Speaker Ø52MM, 4Ω5W*2
    • Bass diaphragm 50MM *1PCS
    • Distrant >15M
    • Extend 32G
    • Frequency 60Hz-16KHz
    • Charge 5V / 0.8A
    • Battery 1800mah/3.7V
    • Palying time 2-6 Hours
    රු4,999.00රු5,300.00
  • Bluetooth Speaker 822 Bluetooth, TF card, U disk, AUX

    • Function Bluetooth, handsfree, TF card, U disk, AUX,,TWS, RGB linght and IPX5
    • Material ABS+Rubber+Fashion fabric+Silica gel
    • Charging USB Micro
    • Color Black, White, OEM Color
    • Unit size 156*76*75mm
    • Net weight 600g
    • Bluetooth 5.0
    • Channel 2
    • Speaker Ø52MM, 4Ω5W*2
    • Bass diaphragm 50MM *2PCS
    • Distrant >15M
    • Extend 32G
    • Frequency 60Hz-16KHz
    • Charge 5V / 0.8A
    • Battery 1800mah/3.7V
    • Palying time 2-6 Hours
  • CNC Shield V3 Engraving Machine / 3D Printer / + 4pcs A4988 Driver Expansion Board for Arduino

    This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
    It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
    රු3,450.00රු4,600.00
  • Computer Speaker C086

    • Supply Voltage USB DC 5V
    • Driver Unit: Ø52MM *2Pcs
    • Output Power(RMS): 6W (3W*2)
    • Impedance: 4Ω
    • Channels: Stereo
    • Bass diaphragm
    • Plug Type: 3.5mm
    • Signal to Noise Ratio ≥65dB
    • Frequency Response: 200HZ-18KHZ
    • Volume control button The line’s control box
    • Cable Length : 1.05M
    • Unit size (L*W*H)82*86*72mm * 2Pcs
    • Material ABS
    • Color Black& RED /Black&/BLUE/ Black &PINK
  • Computer Speaker RGB

    • Lighting: Rhythm Irregular RGB
    • Supply Voltage USB DC 5V
    • Driver Unit: Ø52MM *2Pcs
    • Output Power(RMS): 6W (3W*2)
    • Impedance: 4Ω
    • Channels: Stereo
    • Bass diaphragm /
    • Plug Type: 3.5mm
    • Signal to Noise Ratio ≥65dB
    • Frequency Response: 200HZ-18KHZ
    • Volume control button The line’s control box
    • Cable Length : 1.05M
    • Unit size (L*W*H)70*75*70mm * 2Pcs
    • Material ABS
  • D1 Mini ESP8266 Wi-Fi Development Board

    D1 Mini Nodemcu Lua WIFI Expansion Board Support OTA Launch Internet Development Board for Arduino Compatible with WeMos D1 Mini
    Feature:
    1. Introduction: The WiFi Development Board is D1 mini, which is a mini NodeMcu Lua WiFi board based on ESP-8266EX.
    2. Compatible with WeMos D1 Mini: The D1 Mini NodeMcu Lua 4M byte WLAN WiFi Internet WiFi Development Board is based on the ESP8266 ESP-12F for Arduino and is compatible with WeMos D1 Mini. It can be programmed in an Arduino IDE compatible environment.
    3. 11 Digital Input/Output Pins: The Expansion Board has 11 digital input/output pins, all of which have interrupts/PWM/I2C/support for 1 wire (excluding D0); 1 analog input (maximum 3.2V input). Micro USB connection; Compatible with Arduino; 1MB flash memory; 500mA resettable fuse.
    4. Switching Power Supply: The Internet Development Board has a 4M byte. 5V 1A switching power supply (switching power supply) onboard.
    5. 2 Options: The WiFi Development Board has Micro and Type-C2 options for you to choose from.

     

  • UNO R3 Development Board ATMEGA328P CH340 / ATEGA16U2

    This version is in the original version of the optimization, mainly for foreign customers on product quality and functional requirements of the case of high design, both to ensure that the original and fully compatible with the same, but also easy to use.

    Advantages:
    1 completely solve the traditional for UNO board win7 and win8 system is not compatible with the above instability. Especially in the pirated 64-bit WIN7 system, the official board can not be installed driver, and this version is very simple and easy to install.
    2. Increase the pin socket, easy to use DuPont line.
    3. Replace the 16u2, so that the cost reduced to half, consumers get the most benefits

    Download the program simple and convenient. You can simply use the sensor, a variety of electronic components connected (such as: LED lights, buzzers, buttons, photoresistors, etc.), to make all kinds of interesting works.
    The use of high-speed microprocessor controller (ATMEGA328), the development of user interface and environment are very simple, easy to understand, very suitable for beginners to learn.
    Performance description
    I / O digital input / output terminals 0 ~ 13.
    I / O analog input / output terminals 0 ~ 5.
    Support ISP download function.
    Input voltage: connected to the computer USB without external power supply, external power supply 5V ~ 9V DC voltage input.
    Output voltage: 5V DC voltage output and 3.3V DC voltage output.
    Using Atmel Atmega328 microprocessor controller

Cart

No products in the cart.

Filter Products